Ryzom

I suppose you're using the official static 32 bits client, so the error is correct :) You're using a 64 bits driver with a 32 bits application.

So you have to install 32 bits version of your drivers :)

I have no idea how to do that for ATI but with proprietary nVidia drivers, there are both 32 and 64 bits drivers installed.

thank you kervala, I 'll try it and we 'll see..

thank you any way

ok, you were right, that fixed it, I only had to include some additional libraries, I found them by searching for "ati 32 bit libraries debian"

So I found that:

http://wiki.debian.org/ATIStream

{sudo apt-get install amd-libopencl1

sudo apt-get install multiarch-support fglrx-glx-ia32
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install amd-libopencl1:i386}

I also had to add "ia32-libs" on another fresh installation..
(http://zeldor.biz/2011/02/64-bit-debian-no-such-file-or-directory/)

thank you vary much again..

Thanks a lot for your response :)

I suppose it could help people who'll have the same error.

New fresh installation (again 64bits), did ALL of the above (including 32 bit libraries) and still it cannot find this lib: libGL.so.1 => not found, although I can see that I have the library:

$ sudo locate libGL.so.1
/etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2
/usr/lib/x86_64-linux-gnu/libGL.so.1
/usr/lib/x86_64-linux-gnu/fglrx/fglrx-libGL.so.1.2
/usr/lib/x86_64-linux-gnu/fglrx/libGL.so.1


ANY ideas??
Sorry for all the fuss again

Did you install 32 bits version of ATI drivers ? It seams like only 64 bits are present on your system :(

Well, yes, I had them installed already..

But after you pointed out that, I gave it a better look and even though I had the: "*fglrx-glx-ia32*" package installed, in the description it was saying:
"please switch to "*multiarch libgl1-fglrx-glx:i386*""

I thought I had the multiarch ok since I had already run the:

"sudo apt-get install multiarch-support fglrx-glx-ia32
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install amd-libopencl1:i386"

• dpkg --add-architecture i386 ; apt-get update
• apt-get install libgl1-fglrx-glx:i386@"

So after running this 2 commands, Ryzom started OK (and the "*fglrx-glx-ia32*" package is no longer installed in the Synaptic) :-D

AGAIN thank you kervala

So to sum it up..

To run Ryzom in 64bit Debian with ATI Graphics Card with proprietary drivers (for nVidia you might need to change it a bit {eg: ATI's fglrx -> equivalent nvidia package like }) you have to install the following packages and run the following commands:

sudo apt-get install libxrandr (or something similar like libxrandr2 or libxrandr-dev.. there is also a package called: libxrandr2:i386, you might need it!!?)
sudo apt-get install libstdc++5 (there is libstdc++6 as well, I have that installed too (just to be sure), no problems caused, again there is a package called: libstdc++5:i386 that you might need..

You should run these as well:
sudo apt-get install amd-libopencl1
sudo apt-get install multiarch-support fglrx-glx-ia32
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install amd-libopencl1:i386

Then there is the ia32-libs package which is essential since it is the 32bit libs

And to close it there is this 2 commands that can also been found in the description of fglrx-glx-ia32 and you should run them (that might be new because there was no need for that in my previous installations):

su
dpkg --add-architecture i386 ; apt-get update
apt-get install libgl1-fglrx-glx:i386

Tip: The libgl1-fglrx-glx:i386 package cannot be found in the synaptic so you HAVE to run the commands :-)

To merge the 2 groups of commands..
sudo apt-get install amd-libopencl1
sudo apt-get install multiarch-support
sudo dpkg --add-architecture i386
sudo apt-get update
apt-get install libgl1-fglrx-glx:i386
sudo apt-get install amd-libopencl1:i386¶

If you still have a problem, you should try to Search for libgl on Synaptic and see what might seem to be appropriate (like libgl1-fglrx-glx:i386 or libfglrx:i386, libglib2.0-0:i386..) NOTE: Do that AFTER you have installed the proprietary drivers

I include a little script that I hope to be fine, it has almost everything that are described in here (libgl things excluded, since, I think, most of it is intsalled with the proprietary drivers (actually I think that this IS the proprietary drivers)).

please run it if you have the proprietary drivers installed first
See you¶

Thanks for your solution, I hope it will help other people in the same case :)

No problem, it will definitely help ME for starters, since I use these posts every now and then, whenever I do some fresh installation in my system to see again what I have to do to get things right :-)

See you, and once more thank you for your help!! :-)